• While using the PAM 321 for diving or snorkeling is making use of this watch at the context of its historic roots, the ability to easily, quickly, and just change straps means that I can alter the personality of my PAM 321 in a minute to match my outfit or the present circumstance. The supplied alligator strap is great for office work while the rubber works well for the ocean or the pool… however, the beauty of possessing Panerai watches is acquiring third party straps while at the exact same time completely changing your watch.There are literally 1000’s of aftermarket straps offered for all Panerai models. They are sold from all around the world, some beginning as low as two or three bucks and a few reaching well into the $1K range. The materials vary from calf leather (new or distressed and everything in between) to alligator and crocodile, and to more exotic leathers such as stingray, sharks, reptiles, ostrich, and a lot more. The available colors are multitudinous and the comfort level will fluctuate with the material and construction. For mine, I was able to get a pair of distressed calf leather Large Belt straps from TimeRepublic vendor on eBay for about $60 per (with transport) and with a pre-V (pre-Vendome) buckle included.And naturally, this isn’t mentioning official Panerai straps and bracelets that you can also buy. At the Panerai store in Bal Harbour, FL, for significantly more money, I was able to add the legendary assolutamente deployment strap into my collection in addition to a rare brushed stainless steel bracelet. As previously mentioned, each strap simply completely changes the watch like I had bought a new opinion. This is also from comments of friends and family during my holiday where I used the opinion daily. Together with the stainless steel bracelet, I basically converted my PAM 321 into a PAM 347 because the bracelet is the sole difference between both versions.

  • Eventually, the PAM 321 has a 72 hour power reserve with a sign at 4 o’clock that utilizes a typical Panerai lumed hand (like the seconds hand) moving across a marked semicircle indicating zero to 72 hours. The indicator interferes slightly with the GMT hand once the lumed arrow head travels across it, however, that’s a little cost to pay to quickly know you ought to wear or wind the watch. I also discovered the power reserve indicator to be accurate, showing exactly 36 hours remaining when I completely charged the watch and left it on my Wolf Designs watch winder with a 36 hours beginning delay.As mentioned, I wore the PAM 321 at various contexts: at the pool; interacting; in parties; and even snorkeling and skin diving in the beach. It is a fire that develops from using a watch with unique design that’s versatile (multitude of accessible third party straps that may be changed easily), that is legible (easy, super clear dial and fonts using beautiful lume), and that has a solid presence on the wrist that is tough to match with almost any other watch.With such a strong cult-like following, the requirement for Panerai watches keeps getting stronger with some versions selling out entirely once they are introduced. The PAM 321 reviewed here is an 2012 N series which is limited to 2000 units and retails for $9,800. The PAM 347 which is exactly the same version but with all the bracelet is priced at $10,600. Considering that the bracelet is hard to discover and retails at the Panerai shop for $2,400 (if you can find it!) , I would recommend getting the PAM 347 if you enjoy steel bracelets or would be considering obtaining a bracelet later on. Panerai watches are also well-known for their sumptuous leather straps as well as the Luminor GMT PAM01088 is no exception. Presented on a rich brown leather strap with a steel tang buckle, the Luminor GMT is wonderfully comfy to wear and also a joy to look at. There is even another black rubber strap if the wearer decides to go for a dive or simply wants to bring a new look to the watch.

  • Though the somewhat intimate background with the new Hollywood tie-in would make for a fantastic movie, it does not guarantee a fantastic watch. I really wanted to know what was so special about Panerai and its watches, particularly after seeing my cousin Alain, a medical doctor in Miami, and a person I truly respect, constantly sporting one. There has to be a deeper set of motives that some men (and even gals) are attracted to the new and be obsessed with that. After wearing my PAM 321 for a week direct during part of my winter holiday, I believe I finally cracked the mystery… but let me clarify the PAM 321 and the frequent design language it shares with all Panerai models.Similar to many powerful watchmakers, Panerai follows a common design and design language for all its watches. The most common characteristics are: a large cushion case, highly legible and simple dial with super-legible font, and a flexible range of straps.On my PAM 321, the case is the so-called 1950 instance which is a cushion case formed from a solid block of brushed stainless steel. The crown is polished steel and is shielded by the unique-to-Panerai crown shielding device which helps make the eye watertight. Basically it’s a half-crescent crown guard (tight seal device) of brushed steel that entirely covers the crown except for a small lever that if pulled (with finger or nail) releases the crown. It is an ingenious device that has become a defining visual differentiator for the brand and that’s now trademarked by Panerai because the 1960 patent rights have long died…

  • While this is not an in-house grade designed and manufactured by Panerai, it’s a strong and dependable movement that has been used for over 40 years and, is in a configuration unavailable from any other brand.Like most Panerai watches, the dial is clean and simple to read. In spite of the additional 24-hour ring encircling the matte black dial, Panerai handles to make it legible in a glance. Together with the luminous-painted indexes, this is the point where the Luminor title is actually apparent. Panerai watches glow quite brightly in the dark and the PAM88 isn’t a exception.On the wrist, you wouldn’t expect a 44mm broad and 16mm thick watch to be comfy but, it’s. Panerai has done a good job to design short lugs that permit the glistening square-scale alligator strap to fall naturally. The strap is also tapered in thickness making it supportive but quite flexible where it must be. It’s then fastened using a signed, butterfly deployant clasp.Panerai’s layout of this Luminor instance, such as previously mentioned, places the Luminor GMT squarely in the instrument watch class. However, using a clean design, precise proportions and fine finishing, you can surely wear this watch in a variety of situations. This model is especially flexible as a result of polished case that sees it up a little.

  • Whilst using the PAM 321 for diving or snorkeling is using the watch in the context of its historical roots, the ability to easily, quickly, and just change straps means I can alter the character of my PAM 321 in an instant to match my outfit or the current situation. The provided alligator strap is great for workplace while the rubber works well for the ocean or the pool… but the attractiveness of owning Panerai watches is getting third party straps while at the same time completely modifying your watch.There are literally 1000’s of aftermarket belts readily offered for many Panerai models. They are sold from all around the world, some beginning as low as two or three dollars and a few reaching well into the $1K range. The materials differ from calf leather (fresh or distressed and everything in between) to alligator and crocodile, and to more exotic leathers such as stingray, reptiles, snakes, ostrich, and many more. The available colours are multitudinous and also the comfort level will fluctuate with the material and structure. For mine, I managed to acquire a pair of distressed calf leather Large Belt straps from TimeRepublic vendor on eBay for about $60 per (with shipping) and with a pre-V (pre-Vendome) buckle included.And naturally, this isn’t mentioning official Panerai straps and bracelets which you could also purchase. In the Panerai shop in Bal Harbour, FL, for significantly more money, I was able to add the legendary assolutamente deployment strap to my collection as well as a rare brushed stainless steel bracelet. Both are very hard to find at approved dealers (ADs) or on eBay. As mentioned, each strap simply completely changes the opinion like I had purchased a new watch. This can be from remarks of family and friends during my holiday where I used the watch daily. With the stainless steel bracelet, I basically altered my PAM 321 to a PAM 347 because the bracelet is the only difference between the two versions.

  • Caliber P.9001 is visible through a pane of sapphire in the caseback. Although the rotor is skeletonized, much of the movement’s inner workings are hidden since a large plate covers the whole mechanism except for the balance and its cock. A closer look reveals a sickle-shaped window for your escape wheel and another window through which you can observe the pawl of the automatic cooling system. The rear view also includes the power-reserve display: a crimson field comes into view through the aperture when the energy supply shrinks to a critical degree. The rotor, plate and balance cock are decorated with a wave pattern. Combined with the grim filling of the engraved decoration, it generates an attractively technical look that matches this watch’s overall styling nicely. The glistening heads of the silvery screws also look great, as do a number of the other screws, which have been thermally blued. A few of the edges are beveled, others both beveled and polished: these seem very nice, even though they’re a bit narrow. The cover plate for the balance, which has been stamped from sheet metal and has not been thoroughly polished, is somewhat less impressive.The bidirectionally winding rotor utilizes pawls and runs over low-wear ceramic ball bearings. It provides power to the barrels, which (since the watch’s title indicates) collect enough electricity to keep the watch running for 72 hours. A total of 227 parts — including 29 jewels for ideal reduction of friction — include the movement. Four screws across the rim provide the remedy to the problem of finely adjusting the equilibrium without the need for an index tail. Until a couple of decades back, this detail was earmarked for watches at the upper echelons of haute horlogerie.

  • Overall, despite its high 44-millimeter diameter, the Panerai Luminor 1950 3 Days GMT is quite comfortable to wear, although the lugs do not curve quite far down, which provides this big watch a propensity to slip back and forth across the wrist. Luckily, our concerns that the crown shield may poke into the back of the wrist have been unfounded.The crown shield’s hinged lever also doesn’t interfere with the operation of the watch. It may be immediately opened, and it’s easy to turn the large, easy-to-grasp crown while the watch is strapped to the wrist, making all of the setting functions user-friendly. The mainspring can be manually wound while the crown is pulled out to its first extracted place; the hour to the local time can be flashed in hourly increments when the crown is in its second position — a very handy feature for people who frequently travel beyond their home time zone. Afterward, you can simply swing the lever over the crown and use it to press it into its secured position. Its recurrence triggers the hand to resume moving. Synchronizing this view using an audible time signal or a radio-controlled clock is very simple because of the zero-return mechanism for the seconds hand, also employed by A. Lange & Söhne and discovered on classic Panerai watches. Like the return-to-zero function for the elapsed-time palms of a chronograph, it is triggered by means of a lever inside the motion, acting on a return-to-zero heart mounted on the staff of the hand.

  • There are reasons why folks love and use their watches. Maybe their view has some psychological connection to an event in their past, maybe it was a present, and if you’re like us (watch nerds) you love with a useful mechanical toy onto your wrist which also includes fashion. While I typically readily understand my fellow watch enthusiasts, I will be the first to admit that initially I did not understand the subgroup of watch nerds that are quite frankly fanatics of the Officine Panerai brand, otherwise known as the “Paneristis”.If you are not familiar with this strain of watch lover, only spend a couple of minutes perusing the Paneristi forum and that I pretty much guarantee you will leave the website amazed, maybe confused, by the real enthusiastic and frequent articles from Paneristis all around the world. They discuss every model, post movies, speculate on brand new models, provide advice to novices, and even regularly throw parties (around the world) where fellow Paneristis come for a good time, make friends, and of course show off their cherished Panerai models.I was simply blown away when I found the Paneristis and did not know why they existed in the first location. Also mesmerizing was why Panerai, a relatively recently revived watchmaking firm with limited styling, had become such an iconic brand? That is, I was ignorant, until I received my first Panerai… In this article I will examine my Panerai Luminor 1950 GMT or PAM 321 while trying to shed some light onto the Paneristi motion. While I do not consider myself a part of this “cult” however, I have a learned appreciation for its brand and its products and that I believe I also know what the fire is all about — or at least I shall share with you my comments on the topic.

  • Typical characteristics of the Swiss-made, Italian-designed brand include a satin-finished and pillow-shaped case with a polished bezel, a protective stirrup with a lever used to press the crown securely into the instance, along with a uniquely styled dial with large Arabic numerals and hour indices. But it is not basically different from other Panerai watches. The unmistakable family resemblance of its products is both a strength and a weakness of this brand: if you are not fond of this one’s design, you likely won’t find any other Panerai model to match you. On the other hand, every Panerai watch is instantly familiar to the brand’s numerous lovers. And judging from the remaining power of Panerai’s retro design, the Luminor 3 Days will probably be just as appealing to collectors 10 years from today — which can’t be said about each modern watch.Furthermore, the 3 seasons GMT will boast several details that differentiate it from other Panerai watches. The colour of the ribbon on the date disk is not pure white, but slightly beige. Additionally, we were pleased to note that the 3 seasons leaves do with no magnifying lens found over the date exhibits of some other Panerai watches. Though this model has a number of functions, its dial does not look cluttered: the hand for the second time zone could be concealed under the hour hand for the time, and also the power-reserve display is positioned out of sight on the trunk. The crystals over the dials in other members of the collection are highly domed, but this one is only slightly curved, a gap that people appreciated.The sandwich-style dial, another Panerai trademark, is as beautiful as ever, with an underlying layer of glow-in-the-dark Super-LumiNova topped by an opaque dial pierced with apertures for the numerals and indices that indicate the hours.

  • Details

    Although the rotor is skeletonized, a lot of the movement’s inner workings are hidden since a massive plate covers the whole mechanism but for the equilibrium and its cock. A closer look reveals a sickle-shaped window for the escape wheel and another window through which one can see the pawl of the automatic cooling system. The back view also includes the power-reserve screen: a red field comes into view through the aperture when the energy source shrinks into a critical level. The rotor, plate and balance cock are decorated with a wave pattern. Together with the blue filling of the engraved decoration, it creates an attractively technical look that matches this watch’s overall styling well. The glistening heads of these silvery screws also look good, as do some of the other screws, which were thermally blued. Some of the edges are beveled, others equally beveled and polished: those look very nice, even though they’re a little narrow. The cover plate for the balance, which was stamped from sheet metal and hasn’t been meticulously polished, is less impressive.The bidirectionally winding rotor utilizes pawls and runs on low-wear ceramic ball bearings. It supplies power to the barrels, which (since the watch’s name suggests) collect enough electricity to keep the watch running for 72 hours. A total of 227 parts — such as 29 jewels for perfect decrease in friction — comprise the movement. Four screws along the rim provide the remedy to the issue of finely adjusting the balance without the need for an indicator tail. Until a couple of years back, this detail was reserved for watches at the top echelons of haute horlogerie.

    Basic Info

    Brand Panerai
    Model Luminor 1950 3 Days GMT Automatic
    Ref. No. PAM00441
    Chrono24-ID 4ygf62
    Code 153024500397
    Movement Automatic
    Bracelet material Leather
    Condition 0 (unworn)
      New
    Gender Men’s watch/Unisex
    Location United States of America, Georgia, Atlanta
    Price $10,200 [Negotiable]
    Availability Ready to ship in 3-5 days

    Caliber

    Movement Automatic

    Bracelet/strap

    Bracelet material Leather
    Bracelet color Brown

    Functions

    GMT

    Others

    Display Back

    Report suspicious offer

  • Leave a Reply

    Your email address will not be published. Required fields are marked *

    Name *
    Email *
    Website