Panerai Grade 1 Luminor 1950 Regatta 3 Days Chrono Flyback Automatic Titanio – 47mm PAM00526 1:1 Clone

The new Luminor Submersible 1950 3 Days Chrono Flyback Automatic Titanio – 47mm incorporates features which have in common the military context of their origins, and it appears as a contemporary watch with a strongly sporting character, with great personality and the purest panerai luminor submersible 1950 bronzo best replica identity.
A professional underwater model that is water-resistant to a pressure of 30 bar (a depth of about 300 metres), the new Luminor Submersible 1950 watch has a large Luminor 1950 case, with a diameter of 47 mm. The iconic design of the case is integrated with the unidirectional rotating bezel, made entirely of brushed titanium, for calculating the time of immersion.

Caliber P.9001 is observable through a pane of sapphire in the caseback. |} Though the rotor is skeletonized, a lot of the movement’s inner workings are hidden since a massive plate covers the entire mechanism except for the balance and its manhood. A closer look shows a sickle-shaped window for the escape wheel and another window through which you can see the pawl of the automatic winding mechanism. The back view also includes the power-reserve screen: a red field comes into view through the aperture when the energy supply shrinks to a critical level. Together with the blue filling of this engraved lettering, it generates an attractively technical appearance that matches this watch’s overall styling nicely. The glistening heads of the silvery screws also appear great, as do some of the additional screws, which are thermally blued. A few of the edges are beveled, others equally beveled and polished: these look very nice, even though they’re a bit narrow. The cover plate to the equilibrium, that has been stamped from sheet metal and has not been meticulously polished, is somewhat less impressive.

Panerai Grade 1 Luminor 1950 Regatta 3 Days Chrono Flyback Automatic Titanio - 47mm PAM00526 1:1 Clone

The case is constructed like the hull of a ship, using intersecting arcs producing the shape.The wide, pre-mounted, machine-stitched crocodile-skin strap with cut edges is extremely well-made, as might be the pronged buckle, which brings to mind an old-fashioned jar opener. Some sharp edges become evident when you set it under a loupe, but you do not notice them once the watch is secured to your wrist. All in all, and despite its large 44-millimeter diameter, the Panerai Luminor 1950 3 Days GMT is very comfortable to wear, even though the lugs do not curve very far downward, which provides this big watch a tendency to slip back and forth across the wrist. Fortunately, our concerns which the crown shield may poke uncomfortably into the back of the wrist were unfounded.

panerai luminor marina 1950 3 days replica
It supplies power to the barrels, which (as the watch’s title indicates) collect enough electricity to keep the watch running for 72 hours. A total of 227 components — such as 29 stones for ideal reduction of friction — include the movement. Four screws along the rim provide the remedy to the issue of finely adjusting the equilibrium without the need for an indicator tail. Until a few decades ago, this detail has been earmarked for watches at the top echelons of haute horlogerie.

Technical Details

Movement Automatic mechanical, Panerai Replica P.9100/R calibre, executed entirely by Panerai Replica, 13¾ lignes, 9.55 mm thick, 37 jewels, Glucydur® balance, 28,800 alternations/hour. Incabloc® anti-shock device. Power reserve 3 days, two barrels. 328 components.

Functions Hours, Minutes, Small Seconds, Chronograph Flyback, Regatta Countdown, Seconds Reset

Case Diameter 47 mm, Brushed Titanium

Bezel
Polished Titanium

Back See – through sapphire crystal

Device protecting the crown (Protected as a trademark) Brushed Titanium

Dial Black with luminous Arabic numerals and hour markers. Chronograph hour counter at 3 o’ clock, seconds at 9 o’clock, central chronograph seconds and minutes hands.

Water Resistance 10 bar (~100 metres)

Strap Caoutchouc, Black, -, 26/22 MM Standard

* The trademark Velcro® and Coramid® are not property of Officine Panerai Replica.

* The trademark Velcro® and Coramid® are not property of Officine Panerai Replica.

panerai luminor 1950 ceramica replica

Movement

P.9100/R calibre
Officine Replica has for many years promoted the Panerai Replica Classic Yachts Challenge, the most important international circuit of regattas for classic and vintage yachts. It has dedicated a series of watches to it which today have become cult items among collectors. To celebrate its special link with the world of classic yachts, Officine Panerai Replica has created the P.9100/R calibre, the first Panerai Replica watch with a function specifically associated with the world of sailing: the Regatta countdown function for the start of the race.
The P.9100/R calibre is a development of the P.9100 automatic calibre with chronograph function. With its flyback chronograph with vertical clutch and column wheel, the P.9100/R is identical in architecture and diameter (13¾ lignes) to the P.9100 but it is a little thicker (9.55mm) and it has 26 more parts (328 altogether) as a result of the greater constructional complexity resulting from the addition of the Regatta countdown function. The indication of the countdown to the start is displayed by the two central hands, and it is controlled by the push-button at four o’clock. The minute hand moves backwards by one minute each time the push-button is pressed, until it reaches the position required for the duration of the countdown. At this point it is only necessary to press on the push-button at ten o’clock to start the chronograph function. The hands begin to move, indicating the minutes and seconds which remain before the start, and when the countdown is completed, they continue to measure the time, thus displaying the time elapsed since the start of the race until the chronograph is stopped. The device which enables the minute hand to be moved backwards when the countdown function is operated is controlled, like the whole chronograph, by the column wheel. This is taller than the one in the P.9100 calibre so that it can engage the correcting lever which is mounted higher up, being located on an additional plate.
Read More about this Movement

panerai luminor marina 1950 3 days replica

Panerai Luminor 1950 8 Days Replica

P.9100/R calibre
Officine Replica has for many years promoted the Panerai Replica Classic Yachts Challenge, the most important international circuit of regattas for classic and vintage yachts. It has dedicated a series of watches to it which today have become cult items among collectors. To celebrate its special link with the world of classic yachts, Officine Panerai Replica has created the P.9100/R calibre, the first Panerai Replica watch with a function specifically associated with the world of sailing: the Regatta countdown function for the start of the race.
The P.9100/R calibre is a development of the P.9100 automatic calibre with chronograph function. With its flyback chronograph with vertical clutch and column wheel, the P.9100/R is identical in architecture and diameter (13¾ lignes) to the P.9100 but it is a little thicker (9.55mm) and it has 26 more parts (328 altogether) as a result of the greater constructional complexity resulting from the addition of the Regatta countdown function. The indication of the countdown to the start is displayed by the two central hands, and it is controlled by the push-button at four o’clock. The minute hand moves backwards by one minute each time the push-button is pressed, until it reaches the position required for the duration of the countdown. At this point it is only necessary to press on the push-button at ten o’clock to start the chronograph function. The hands begin to move, indicating the minutes and seconds which remain before the start, and when the countdown is completed, they continue to measure the time, thus displaying the time elapsed since the start of the race until the chronograph is stopped. The device which enables the minute hand to be moved backwards when the countdown function is operated is controlled, like the whole chronograph, by the column wheel. This is taller than the one in the P.9100 calibre so that it can engage the correcting lever which is mounted higher up, being located on an additional plate.
Read More about this

Panerai Luminor 1950 8 Days Replica

Functions
Hours, Minutes, Small Seconds, Chronograph Flyback, Regatta Countdown, Seconds Reset

Movement
P.9100/R calibre

Case
Luminor 1950

Case diameter
47 mm

Dial color
Black



Leave a Reply

Your email address will not be published. Required fields are marked *