OFFICINE PANERAI PRESENTS THE LUMINOR 1950 3 DAYS CHRONO FLYBACK ORO ROSSO, a new chronograph with flyback function and an automatic movement with a power reserve of three days. The new chronograph in red gold is the first to be made by Officine panerai luminor 1950 3 days replica using the new P.9100 calibre, developed and produced entirely in the Panerai manufacture in Neuchâtel.
The flyback function, controlled by a push-button at eight o’clock, instantly returns the chronograph hands to zero and simultaneously restarts without it being necessary first to stop them and return them to zero by pressing the stop and reset buttons. To make it clear and easy to read, the chronograph minutes and seconds hands are both positioned centrally on the main dial and distinguished by being different colours: the seconds hand is blue while the minute hand is gold in colour, advancing instantly in one jump every sixty seconds. This arrangement enables the quintessential design for the black dial to be used, with its distinctive simple bar hour markers and numerals at the cardinal points, date window at three o’clock and small seconds dial at nine o’clock. The structure of the dial is that designed by Panerai in the late 1930s to ensure high visibility even in very low lighting conditions, and it is formed of two superimposed plates, the upper one being perforated to correspond with the markers on the dial so that the luminescence of the Super-LumiNova® can be seen.
The case of the new Luminor 1950 3 Days Chrono Flyback Oro Rosso is 44mm in diameter and water-resistant to 5 BAR (~50 metres). On the back of the case, the 12-sided caseback has at its centre a large sapphire crystal window which reveals the manufacture P.9100 movement. The Luminor 1950 3 Days Chrono Flyback Oro Rosso is supplied with a brown alligator strap which is easily replaced by means of the Panerai interchangeability device fitted in the lug of the watch.

Careful scrutiny uncovered a few specks of dust on the palms, which were stamped from rather thin stock, which causes them to bend toward the glistening eyelet at the middle of the dial. There’s also an obvious break in the satin finishing above the lugs, which take the crosspiece that retains the strap.In the other respects, but the circumstance is excellently crafted. Additionally, it scores points for its quick-change method for the strap lugs. A distinctive tool, delivered with the watch, may be used to press a button on the bottom of each drag, making it effortless to push out the crosspiece, eliminate the leather strap and set up the alternative rubber one that is also included.

Panerai Eta Movement Luminor 1950 3 Days Chrono Flyback Automatic Oro Rosso - 44mm PAM00525 Best Replica

The brand new Luminor Ceramica does not venture far from that source. The situation comes in at 44 mm, which, though ample, is amazingly light. This is as it is made from a synthetic ceramic based on zirconium oxide. This substance is five times tougher than steel, and is significantly lighter. It’s also quite resistant to scratches, corrosive agents and elevated temperatures — a logical leap, provided that zirconium oxide has to be fired at temperatures as high as 1500° C to be able to synthesize into its ceramic form. The instance is subsequently bead-blasted to attain a matte finish.

panerai luminor 1950 3 days replica
The push-button in 4 o’clock controls the regatta countdown.The see’s engine is Panerai Caliber P.9100/R, a modified variant of Caliber P.9100 with an extra module to the countdown function. Like the Flyback models, this watch includes a tachymeter scale in crimson and knots, luminous hour markers on the dial whose colour is echoed in the strap’s contrast stitching. The strap is constructed from natural untreated leather and fastens into the wrist using a titanium grip having a heat-stamped “OP” (Officine Panerai) emblem. The price: $17,200.

Technical Details

Movement Automatic mechanical, P.9100 calibre, executed entirely by Panerai Replica, 13¾ lignes, 8.15 mm thick, 37 jewels, Glucydur® balance, 28,800 alternations/hour. Incabloc® anti-shock device. Power reserve 3 days, two barrels. 302 components.

Functions Hours, Minutes, Small Seconds, Date, Chronograph flyback, Seconds Reset

Case Diameter 44 mm, 18 ct. Polished Red Gold

Bezel
Polished Red Gold

Back See – through sapphire crystal

Device protecting the crown (Protected as a trademark) brushed red gold

Dial Black with luminous Arabic numerals and hour markers. Date at 3 o’clock, seconds at 9 o’clock, central chronograph seconds and minutes hands.

Crystal Sapphire crystal formed of corundum

Water Resistance 5 bar (~50 metres)

Strap Alligator, Dark brown, Ecru, 24/22 MM Standard

* The trademark Velcro® and Coramid® are not property of Officine Panerai Replica.

* The trademark Velcro® and Coramid® are not property of Officine Panerai Replica.

panerai luminor 1950 3 days replica

Movement

P.9100 calibre
The P.9100 calibre is the first automatic movement with chronograph functions developed by Officine Replica and it is produced entirely in the Panerai Replica manufacture in Neuchâtel, with materials and standards of workmanship at the peak of the sector in terms of technology, quality and reliability. With a chronograph with a vertical clutch and column wheel, the new calibre is unusual in that the chronograph minutes are displayed by a central hand which jumps forward once every 60 seconds. It also has the useful flyback function. This enables the chronograph hands which are already running to be returned instantaneously to zero and restarted without first having to stop them, return them to zero and then restart them. This function is controlled by the push-button at eight o’clock, which is also used to return both hands to zero when the chronograph has already stopped.
The P.9100 calibre is 13¾ lignes (31 mm) in diameter and 8.15 mm thick; it has 37 jewels and consists of 302 components. The two spring barrels in series give a power reserve of 72 hours. The choice of the double spring barrel enables thinner, longer springs to be used, which is beneficial for the duration and evenness of the supply of energy. The automatic winding is carried out by a bidirectional rotor on ball-bearings operating two narrow arms terminating with hooks, which wind the springs of the barrels with every movement of the rotor itself. Supported by a single bridge with a KIF Parechoc® anti-shock device, the Glucydur® balance wheel oscillates at 28,800 vibrations/hour (equivalent to 4hz) and it is the variable inertia type, with the regulation carried out by adjusting four square-headed screws fitted in the outer perimeter of the balance wheel; the spring is therefore free, without the curb pins which can be a source of irregular timekeeping.
Read More about this Movement

Panerai Luminor 1950 Ceramica Replica

P.9100 calibre
The P.9100 calibre is the first automatic movement with chronograph functions developed by Officine Replica and it is produced entirely in the Panerai Replica manufacture in Neuchâtel, with materials and standards of workmanship at the peak of the sector in terms of technology, quality and reliability. With a chronograph with a vertical clutch and column wheel, the new calibre is unusual in that the chronograph minutes are displayed by a central hand which jumps forward once every 60 seconds. It also has the useful flyback function. This enables the chronograph hands which are already running to be returned instantaneously to zero and restarted without first having to stop them, return them to zero and then restart them. This function is controlled by the push-button at eight o’clock, which is also used to return both hands to zero when the chronograph has already stopped.
The P.9100 calibre is 13¾ lignes (31 mm) in diameter and 8.15 mm thick; it has 37 jewels and consists of 302 components. The two spring barrels in series give a power reserve of 72 hours. The choice of the double spring barrel enables thinner, longer springs to be used, which is beneficial for the duration and evenness of the supply of energy. The automatic winding is carried out by a bidirectional rotor on ball-bearings operating two narrow arms terminating with hooks, which wind the springs of the barrels with every movement of the rotor itself. Supported by a single bridge with a KIF Parechoc® anti-shock device, the Glucydur® balance wheel oscillates at 28,800 vibrations/hour (equivalent to 4hz) and it is the variable inertia type, with the regulation carried out by adjusting four square-headed screws fitted in the outer perimeter of the balance wheel; the spring is therefore free, without the curb pins which can be a source of irregular timekeeping.
Read More about this

Panerai Luminor 1950 Ceramica Replica

Functions
Hours, Minutes, Small Seconds, Date, Chronograph flyback, Seconds Reset

Movement
P.9100 calibre

Case
Luminor 1950

Case diameter
44 mm

Dial color
Black



Leave a Reply

Your email address will not be published. Required fields are marked *

Name *
Email *
Website